Belimo AFX24S EXQUISITE WORKMANSHIP Breathable

Description

Documents and manuals

Belimo AFX24-S Documents

Datasheet Installation Instructions More Info

Overview

Details for AFX24-S

Damper Actuator | 180 in-lb | Spg Rtn | 24V | On/Off

For On/Off, fail-safe control of dampers in HVAC systems. Actuator sizing should be done in accordance with the damper manufacturer’s specifications. Control is On/Off from an auxiliary contact or a manual switch. The actuator is mounted directly to a damper shaft up to 1.05″ in diameter by means of its universal clamp. A crank arm and several mounting brackets are available for applications where the actuator cannot be direct coupled to the damper shaft. Maximum of two AF’s can be piggybacked for torque loads of up to 266 in-lbs. Minimum 3/4″ diameter shaft and parallel wiring.

Specifications

Actuator Type

Spring return

Angle of Rotation

95

Auxiliary Switches

2 SPDT

Control Type

On/Off

Degree of Protection

852

Electrical Connection

cable

Power Consumption (Holding)

2.5 W

Power Consumption (Running)

5 W

Protection category

IP54

Running Time (Fail-safe)

<20 s

Running Time (Motor)

75 s / 90B0

Torque

180 in-lb [20 Nm]

Voltage AC/DC

AC/DC 24 V

Parts & Accessories

ZTH US | Handheld programming tool with ZK1-GEN | ZK2-GEN and ZK6-GEN. | Belimo ZG-R01 | 4 to 20 mA adaptor: 500 ohms | 1/4 W resistor with 6″ pigtail wires. | Belimo KH-AFB | AF/NF crankarm (with 3/4″ diameter shaft pass through). | Belimo KG8 | Ball joint for 5/16″ diameter rod | 90 | galvanized steel. | Belimo KH8 | Universal crank arm for KG8 or KG10A ball joint | 21/64″ slot width. For damper shafts: 3/8″ to 11/16″ diameter or 3/8″ to 9/16″ square. | Belimo KG10A | Ball joint for 3/8″ diameter rod | zinc plated. | Belimo